Item # SES Superior Epoxy Seal

64% Solids, Excellent Adhesion Epoxy System

SUPERIOR EPOXY SEAL is a two component epoxy-polyamide sealer designed to protect and beautify concrete, metal, brick and wood. It provides a durable, cleanable light reflecting coating with excellent adhesion and protective qualities.

Color Chart

Uses
• Base color coat.
• Slip-resistant surface when suitable grit is broadcast into freshly applied surface.
• Semi-gloss topcoat.

Advantages
• Fast-drying and easy to apply.
• Improves the appearance and performance of any substrate.
• Provides cleanable, durable, light-reflective floor.
• Suitable for warehouses, stairs, machine shops, garages, and most industrial environments.

Surface Preparation Apply SUPERIOR EPOXY SEAL to clean, sound substrate. Dusty, soft or greasy concrete will be difficult to coat and may cause delamination. It is often helpful to get a good, rough profile on the concrete to assure a good mechanical bond. Shot blasting with light shot, wire brushing or acid etching can achieve the desired effect. Surfaces should be washed, degreased and vacuumed. When using SUPERIOR EPOXY SEAL on existing coatings, test for compatibility by applying test patch. Check for any lifting, softening or peeling of the existing coating. Strip the old coating if there is any doubt about compatibility.

Mixing & Application Part A and part B should be charged to a clean mixing pail and mixed until streak-free. If the temperature is below 50 deg F, allow the mixed product to stand for 30-45 minutes before applying. Apply with a medium nap (3/8 inch) roller, brush or spray. For a skid-proof surface, immediately broadcast a suitable grit into the wet coating. Skid-proof within 15 minutes of application.

Limitations
• Do NOT apply when temperature is below 40°F.
• Do NOT apply to latex modified mortar or concrete.

Clean Up Clean tools and equipment immediately with a suitable solvent such as xylene or lacquer thinner.

Caution For professional use only. Epoxy systems can cause delayed dermatitis. Avoid prolonged contact with skin. See Material Safety Data Sheet for proper handling and required safety equipment.

Specification
• Packaging: 2 gallon units;10 gallon units;110 gallon units
• Mix Ratio by Volume: 1:1
• Color: Tile Red, Blue, Light gray, Dark gray, Green, Brown and White
• Pot Life (100 Grams): 6-10 hours
• Shelf Life: 1 Year
• Cure Schedule: Tack-Free: 2 hours Re-Coat 4-6 hours Light Traffic: 16-24 hours Full Cure: 7-10 days At temperature below 60 deg F, allow extra time for curing.
• Application Temperature: 40 to 90 °F at time of application
• Solids by Weight: 64% ± 2 depending upon color
• Recommended Film Thickness: Recommended 3 mils dry

ESTIMATION CHART

COVERAGE FOR COATING OR MEMBRANES

Thickness of Coating Applied (1000 mils = 1 inch)	Coverage per U.S. Gallon 100% Solids System
1/4 inch = 250 mils	6.4 Square Feet
3/16 inch = 187.5	8.5 Square Feet
1/8 inch = 125mills	12.8 Square Feet
100mils	16.0 Square Feet
1/16 inch = 62.5 mils	25.5 Square Feet
50 mils	32.0 Square Feet
1/32 inch = 31.25 mils	51.0 Square Feet
20 mils	80.0 Square Feet
1/64 inch = 15.625 mils	102.0 Square Feet
10 mils	160.0 Square Feet
5 mils	320.0 Square Feet
1 mil	1600.0 Square Feet

If coating contains a solvent which will evaporate, thickness of coating will be reduced by same percentage as solvent loss.