Superior Epoxies & Coatings, Inc. - Item # SPBG, Superior Patch Binder Gel
Superior Epoxies & Coatings, Inc. Superior Gloss Showroom Floor
Online Catalog Charts Spec Sheets Photo Gallery General Info News About Superior Contact Superior Reps Wanted Home
Construction Products
Dowel Bar Adhesives
•   Dowel Bar Adhesives
•   Patch Binders
•   Saw Cut Fillers
•   Crack Weld
•   Bumper Weld
   
Coatings & Floorings
Superior Gloss Safety Yellow Striping
•   Epoxy Primers
•   Glosses & Top Coats
•   Epoxy Seals
•   Binders
•   Surfacing Systems
   

Sealants
Dowel Bar Adhesives
•   Joint Seals
•   Security Sealant
   
 
 Search Catalog
      GO   
 All Categories    Superior Patch Binder Gel
All Categories > Construction Products > Superior Patch Binder Gel > Item # SPBG  
Request Information

Item # SPBG Superior Patch Binder Gel



    Print Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

Superior Patch Binder Gel

Non-Sag, 100% Solids, 1:1 Mix Ratio Epoxy Gel

SUPERIOR PATCH BINDER GEL is a two component, gel consistency, 100% solids, epoxy adhesive system designed to bond cured concrete to cured concrete. SUPERIOR PATCH BINDER GEL may also be used for bonding steel in concrete as well as many other miscellaneous construction materials.


Uses
  • Cured concrete bonder.
  • Adhesive for miscellaneous construction materials.
  • Epoxy mortar for vertical and overhead patching.


    • Advantages
  • Moisture insensitive.
  • Easy 1:1 mix ratio.
  • 100% solids, conforms to VOC regulations.
  • Moderate working time.


    • Surface Preparation
    The surface must be clean and free of any dust, oil, grease, laitance, curing compounds or any other contaminants. This should be achieved by sandblasting, water blasting or some other mechanical means. New concrete surfaces may be acid etched with muriatic acid and rinsed thoroughly. Surface may be dry or damp, but must be free of standing water.

    Mixing & Application
    The individual components should be mixed prior to combining them. Do not mix more material than can be used in 40 minutes. Mix thoroughly, 1 part by volume, component A with 1 part by volume of component B in a suitable clean container and mix with a low speed drill until a uniform color is obtained. The sides and bottom of the mixing container should be scraped frequently to ensure complete mixing. The Kol mixer is ideal for this operation. The receiving surface should be primed with the neat epoxy mix prior to placing the mortar mix.

    Limitations
  • Do NOT apply when temperature is below 40°F.
  • Do NOT apply to latex modified mortar or concrete.


    • Clean Up
    Clean tools and equipment immediately with a suitable solvent such as xylene or lacquer thinner.

    Caution
    For professional use only. Epoxy systems can cause delayed dermatitis. Avoid prolonged contact with skin. See Material Safety Data Sheet for proper handling and required safety equipment.

    Specification
  • Packaging: 2 gallon units,10 gallon units,100 gallon units
  • Mix Ratio by Volume: 1:1
  • Color: Part A - White; Part B - Black
  • Pot Life (100 Grams): 35-45 minutes
  • Bond Strength: 1500 psi minimum, 14 day moist cure (ASTM C-882)
  • Compressive Modulus: < 130,000 psi (ASTM D-695)
  • Water Absorption: < 1 %
  • Shelf Life: 1 Year
  • Shore D Hardness: 65 - 75 D (ASTM D-9940)
  • Consistency: Gel
  • Weight per gallon: 11.95
  • ASTM C-881: Type III, Grade 3, Classes B & C
  • Coverage: 231 cu. in./gallon

    		•

    Request Information
    		 

     

    Superior Epoxies & Coatings, Inc. (800) 240-1310
    Fax: (800) 240-7662
    2527 Lantrac Court
    Decatur GA 30035
    © 2006 Superior Epoxies & Coatings. All Rights Reserved   
    Web Design by SMF Associates